POWER RUSTGUARD DW Dewatering fluids are mainly based on hydrocarbon solvents containing a selected combination of additives that enable complete water displacement and penetration of treated metal surfaces. After removing the metal from the solution, the solvent evaporates leaving a clean, dry surface.
Rapid air release and lowfoaming
Excellent corrosionprotection
Avoids water spots when dewatering sensitive surfaces, such as polished or plated components
Good compatibility with sealingmaterials
POWER RUST GUARD DW |
Test Properties |
Test Method |
DW RUST OIL |
|
 |
Appearance | Visual | Bright & Clear |
| Colour | ASTM D 1500 | Brown | |
| Density @ 29.5, °C, g/ml | ASTM D 1298 | 0.800 Min | |
| Viscosity, Kinematic 40 at°C, cSt | ASTM D 445 | 1.5 Min | |
| Flash Point, COC, °C | ASTM D 92 | 50 Min | |
| DEMULSIBLITY TEST | ASTM D 1401 |
PASS | |
| FILM THICKNESS | - | 2 micron | |
| COVERAGE, Sq. meter / Ltr | - | 64 | |
| FILM TYPE | - | OILY & TACKY | |
| COPPER STRIP CORROSION 3Hrs. | ASTM D 130 | 1 | |
| EVAPORATION LOSS @110°C FOR 03 HRS. | ASTM D 5800 | Report |
The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. In submitting this information, no liability is assumed or license or other rights express or implied given with respecttoanyexistingorpendingpatent,patentapplicationsortrademarks.Theobservanceofalllegal regulations and patents is the responsibility of theuser.