POWER

VACUUM OIL

VM 4 OIL



POWER VACCUM OIL VM-4 oil is a non-toxic &high performance oil formulated to maximise lubricant life,even under high load conditions & elevated temperature.
- Power VM-4 oil offers excellent wide temperature resistance of – 5 ºC to + 130 ºC.
- Power VM-4 oil minimizes deposits in vacuum pump systems for increased pump efficiency.


Direction of Use

  • For optimum performance drain & flush the vacuum pump sump prior to filling POWER VM-4 oil.
  • Fill vacuum pump with VM-4 oil to correct level.
  • Drain & fill correct oil.
PROPERTIES POWER VM-4
APPEARANCE Bright and clear
BASE TYPE HIGH PURITY BASE FLUID
K. Viscosity @ 40 ºC 82 (T)
Flash Point >210 ºC
TEMPERATURE RANGE MINIMUM -5 ºC TO + 130 ºC
Sp. Gr. @ 29.5 ºC 0.85 TO 0.90

Note To Purchaser :Our technical advise – whether verbal, in writing or by way of trials – is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale and Delivery

MSDS:-Health and Safety: Based on available toxicological information, these products have little or no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including avoiding prolonged, repeated skin contact.

© all right Reserved POWER LUBES(INDIA)| 2021
TechnoPear